Setting Goals

Greg Anderson once said, â€Å"When we are motivated by goals that have deep meaning, by dreams that need completion, by pure love that needs expressing, then we truly live life. † Always start with a quoteHe implies that if people set goals in life and have dreams to fulfill their passions, then they are truly living their lives with a meaning. Individuals should set goals in life. Even though setting goals in life is essential, others disagree stating goals only make people become worried because high pressure to achieve them.This is wrong, however, because when creating goals, people are held responsible for them which will increase the chance of completing them. Setting goals in life can help many achieve much more and is essential because it helps people live a better life, become better, and push forward. Setting goals in life helps people live more. When the goals are completed, new found knowledge and abilities let individuals experience more out of the same life event s compared to the previous person they were. For example, a twenty–year-old’s worldview is different compared to when they were ten.They would see life with much more clarity, depth and perspective today than they were in the past. Add specific example Also, goals with specific measures and deadlines ensure people maximize production and experiences during their time here. Another reason dreaming and goal setting is important is because it helps individuals become a better people. Goals help people achieve their highest potential. Without goals, people would live in a way that keeps themselves safe and comfortable every day. avoid indefinite pronouns The familiarity is the enemy of growth.It prevents people from growing. It does not enable people to become the best people they can be. It denies people from tapping into all the potential that lies inside of them. In my goal achievement processes, I have found myself constantly bursting through new grounds and uncovering potential which I did not know existed before. Add a specific example Without these goals, I would be just doing everything normally. It has made me much more self-aware and learn a lot more things about both myself and life, compared to if I did not have those goals.By setting goals, it drives people forward. Goals are a representation of inner desires; desires which motivate people in life. The point when goals are made marks the point when people are most connected with their source of motivation. It is when motivation is at its peak. Having goals serves as a constant reminder of a motivational foundation. They are the fuel which drive individuals forward and keep them going when there are obstacles in the way. Add an example ( Michael Jordan who didn’t make it to first team or a president)Setting goals can do so much in life compared not setting goals. If people were to take some time out to set goals now, it would be guaranteed that they would definitely experience more growth as a person. By spending a few minutes to communicate some aspirations that have been in their mind, they could experience more progress in life a year from now than compared to if they did not. As shown, setting goals is important. It helps people live better lives, become better, and drives people forward. Setting Goals Greg Anderson once said, â€Å"When we are motivated by goals that have deep meaning, by dreams that need completion, by pure love that needs expressing, then we truly live life. † Always start with a quoteHe implies that if people set goals in life and have dreams to fulfill their passions, then they are truly living their lives with a meaning. Individuals should set goals in life. Even though setting goals in life is essential, others disagree stating goals only make people become worried because high pressure to achieve them.This is wrong, however, because when creating goals, people are held responsible for them which will increase the chance of completing them. Setting goals in life can help many achieve much more and is essential because it helps people live a better life, become better, and push forward. Setting goals in life helps people live more. When the goals are completed, new found knowledge and abilities let individuals experience more out of the same life event s compared to the previous person they were. For example, a twenty–year-old’s worldview is different compared to when they were ten.They would see life with much more clarity, depth and perspective today than they were in the past. Add specific example Also, goals with specific measures and deadlines ensure people maximize production and experiences during their time here. Another reason dreaming and goal setting is important is because it helps individuals become a better people. Goals help people achieve their highest potential. Without goals, people would live in a way that keeps themselves safe and comfortable every day. avoid indefinite pronouns The familiarity is the enemy of growth.It prevents people from growing. It does not enable people to become the best people they can be. It denies people from tapping into all the potential that lies inside of them. In my goal achievement processes, I have found myself constantly bursting through new grounds and uncovering potential which I did not know existed before. Add a specific example Without these goals, I would be just doing everything normally. It has made me much more self-aware and learn a lot more things about both myself and life, compared to if I did not have those goals.By setting goals, it drives people forward. Goals are a representation of inner desires; desires which motivate people in life. The point when goals are made marks the point when people are most connected with their source of motivation. It is when motivation is at its peak. Having goals serves as a constant reminder of a motivational foundation. They are the fuel which drive individuals forward and keep them going when there are obstacles in the way. Add an example ( Michael Jordan who didn’t make it to first team or a president)Setting goals can do so much in life compared not setting goals. If people were to take some time out to set goals now, it would be guaranteed that they would definitely experience more growth as a person. By spending a few minutes to communicate some aspirations that have been in their mind, they could experience more progress in life a year from now than compared to if they did not. As shown, setting goals is important. It helps people live better lives, become better, and drives people forward.

Europe On The Eve Of World War I Essay

World War I, or The Great War, actually started on June 28, 1914 upon the assassination of the heir to the Austro-Hungarian throne, Archduke Franz Ferdinand, by a Serbian national. This led to a series of battles upon the eventual formation of the Central Powers made up of Germany, Austro-Hungary, the Turkish Ottoman Empire and Bulgaria, and they fought against the Entente Powers made up of Russia, France and Great Britain. However, since â€Å"Europe stumbled unexpectedly into war in the summer of 1914,†1 the question remains as to which of the major countries that fought the First World War were most prepared in terms of economy and military strength and which were not. Britain Among the Entente Powers during WWI, Britain was actually considered â€Å"the greatest colonial power [and] maintained the greatest navy. †2 However, it is also a fact that during that time Britain â€Å"was being increasingly challenged by France and Russia†3 and Germany. The British in fact â€Å"increased their warship production with the  William R. Griffiths and Thomas E. Griess, The Great War (2003): 1. 2. Ian Westwell, World War I Day by Day (1999): 7 3. Ibid. 4. Spencer Tucker, The Great War 1914-18 (1998): 3 intention of war†5 and in fact had a series of wars with Africa in 1899. Britain, along with the other great European powers, â€Å"embarked on an arms race that ran in tandem with the scramble for colonies,†6 which simply means that the reason they improved their armies and navies was because â€Å"they needed to protect far-flung colonies and maintain a balance of military power with their neighbors in Europe. †7 During the early 20th century, Britain launched â€Å"HMS Dreadnought, a Battleship incorporating several new technologies that was far superior to any vessel afloat in 1906†8 This was somehow the reason why other European powers especially Germany began improving and â€Å"building their own dreadnought-type battleships†9 because they saw â€Å"a sudden vulnerability of their costly fleets. †10 However, one rumor was that â€Å"the British recognized the naval competition from Germany as a threat to their existence,†11 though â€Å"the naval arms race between these two powers would continue until the eve of the war. 5. Westwell, 7. 6. Ibid, 8. 7. Ibid. 8. Ibid. 9. Ibid, 9. 10. Ibid. 11. Griffiths and Greis, 5. 12. Ibid. It is said that naval arms race between these two powers would continue until the eve of the war. †13 Nevertheless, â€Å"by 1914, Germany had a navy second only to England’s. †14 Economically, it is said that Britain, along with France and Germany, was ready for the Great War. The most important influence upon British and the rest of the European military during those times was in fact â€Å"the largess bestowed upon European societies by the Industrial Revolution. †15 It is said that â€Å"a wealth of goods, rising productivity, and material well-being†16 were brought about by the factories of the latter half of the 19th century. This period of economic growth all over Europe led to â€Å"the greater availability of education for the lower classes† and that â€Å"better and more widespread educational opportunities enabled citizens to comprehend more readily the†¦military affairs of the state. †17 This perhaps encouraged nationalism among the people of the various European nations. Consequently such feelings may have similarly encouraged rivalries with other nations. Thus, the soil for the war was fertile and all it needed was the seed – which was the assassination of Archduke Franz Ferdinand. 13. Griffiths and Greis, 5. 14. Ibid. 15. Ibid, 6 16. Ibid. 17. Ibid. France As early as 1870, â€Å"France had considered itself – and had been considered by others – the leading military power of Europe. †18 It was defeated by Germany during the Franco-Prussian War in 1871 but it was not stated whether this war was really a showcase of the French military but rather it â€Å"meant a lasting antagonism†19 with Germany. Nevertheless, despite being a military power in the late 9th century, France had its â€Å"entire†¦province of Alsace [seized as well as] part of a second province, Lorraine. †20 Germany Since the empire became united in 1871, â€Å"imperial Germany had rapidly emerged as the dominant industrial and military power†21 in Europe and such â€Å"created a potentially explosive situation. It was also believed that â€Å"by the start of the twentieth century, Germany was creating a first-class navy,† which was in fact considered â€Å"the most obvious and dramatic illustration of Germany’s surging power in many spheres. †23 Such was the 18. Neil M. Heyman, World War I (1997): 5. 19. Ibid. 20. Ibid. 21. Ibid. 22. Ibid. 23. Ibid. greatness of the military strength of Germany in the early 20th century. In addition to that, Germany also had an economy that was emerging as one of the strongest in the whole of Europe. Since 1870, Germany’s â€Å"industry had grown so rapidly that this part of Europe, which had supplied immigrants to the Western Hemisphere for more than a century, now imported labor from Poland. †24 Twentieth century Germany was actually home to â€Å"higher education and scientific research [and] a system of social insurance for its working class† and in fact, the country â€Å"could pride itself on being a world leader. † Germany also prided itself with a great leader during that time. The ruler of Germany, Kaiser Wilhelm II, was often considered as â€Å"the embodiment and often the director of [Germany’s] restless energies. †25 By the late 19th century, Kaiser Wilhelm II earned the respect and friendship of a few ambitious military leaders who were against Britain and who would want to challenge it to war. One of these military leaders was Admiral Alfred von Tirpitz, the Secretary of State of the Imperial Naval Office of Germany at that time. Moreover, Kaiser Wilhelm II also had his own imperialist ambitions as well for he considered the German navy â€Å"a tool of external power†26 and even declared it to Prime Minister Arthur Balfour of Britain in 1902, many years before the outbreak of WWI. In fact â€Å"the Kaiser sought to play   24. Heyman, 5. 25. Ibid, 6. 26. Ibid. politics, and repeatedly declared that he was determined to make Germany not just dominant in European affairs but in the world† and had a â€Å"desire for a German-dominated central Europe. †27 Such was the measure of Wilhelm II’s ambition and resolve. The Kaiser’s biographer even wrote, â€Å"Only with a fleet could Germany be able to elicit from the British the esteem Wilhelm II believed to be his due. †28 Germany was indeed already a strong power in the early 20th century many years before the outbreak of the Great War. It is said that â€Å"the security of Austria-Hungary, the weaker of the Central Powers, was [even] guaranteed by Kaiser Wilhelm II [since] late 1912. †29 Such was the strength of Germany at that time that they could even guarantee the protection of the territory of another country in addition to their own. Conclusion On the eve of World War I, Britain, France and Germany were all ready for the war that was to ensue. However, among the three, Germany seemed to be the most prepared especially when it came to the military, specifically the development and advancement of its naval warships as well as powerful leadership in the person of Kaiser Wilhelm II. On the other hand, France, although a leading military power of Europe at that time, was in fact torn apart by Germany during the 1871 Franco-Prussian War, hence was not impressively strong compared to Britain and Germany. 27. Tucker, 3. 28. Heyman, 6. 29. Westwell, 9. BIBLIOGRAPHY Griffiths, Williams R. and Griess, Thomas E. The Great War. New York: Square One Publishers, Inc. , 2003. Heyman, Neil M. World War I. Connecticut: Greenwood Publishing Group, Inc. , 1997. Tucker, Spencer. The Great War 1914-18. Indiana: Indiana University Press, 1998. Westwell, Ian. World War I Day by Day. New York: The Brown Reference Group, Plc. , 1999.

Body Image A Sociological Analysis Sociology Essay

Body Image A Sociological Analysis Sociology Essay The everyday lives of people living in the 21st century are pervaded by the media. Due to the huge rise in modern technology the pressure on individuals to conform to a certain body type is more intense than ever. Tiggemann (2002) claimed that the media puts severe pressure on woman of all ages to be a certain size, `Repeated exposure to such images may lead a woman to internalize the thin ideal such that it becomes accepted by them as the reference point against which to judge themselves (Tiggemann, 2002, P92)`. Unrealistic standards of what is considered â€Å"normal† in reference to body weight and appearance are constantly shown in the media. This portrayal of what is considered â€Å"normal† continues to become thinner and thinner. There is no surprise that the ongoing exposure to unrealistic ideas on what is said to be the ideal body shape for women within this media-driven culture has contributed to the current high levels of body dissatisfaction in females toda y. As schools include ‘healthy eating’ on the school curriculum and media images continue to reinforce the ideal of the slender women, young girls are becoming increasingly aware of the pressure to be slim (Fulcher & Scott, 2007:307). In The Sociological Imagination, C Wright Mills argues that ‘neither the life on an individual nor the history of society can be understood without understanding both’ (Mills, 1959:3). Throughout, keeping C. Wright Mills statement in mind, a sociological outlook on the everyday issue of body weight will be a central focus, examining how specific eating habits and behaviors came to be constructed. From this, social and cultural concepts will also contribute to a better understanding of how bodily processes and social structures are in many ways contributing to the development of disorders such as anorexia and bulimia. In modernity, the media represent a key cultural structure which influences eating behavior and in turn, what c onstitutes normal eating. According to Durkheim (1970), both cultural and social structures are external factors in society which have a constraining effect on the individual. In western society the media are responsible for spreading female body type ideals through the ‘glamorization of slenderness’ (Bordo, 1993: 103). In the 1950s the ideal female body type was a curvaceous, fuller figure (Fulcher & Scott, 2007: 307) as represented by Marilyn Monroe, one of the most photographed women of her time. As cultural ideals have changed, images of women portrayed in the media have become increasingly thinner. Furthermore, female body shape ideals are reinforced by advertisers who use slim models to sell products (Fulcher & Scott, 2007: 307). This leads to women comparing themselves with the cultural ideal and internalizing modern conceptions of femininity (Fulcher & Scott, 2007: 307). Therefore, women are becoming increasingly accustomed to altering their eating habits in ord er to achieve the cultural ideal of slenderness. One way women control their eating habits is through dieting, which involves the restriction of the amount and type of food consumed (Fulcher & Scott, 2007: 307), the steady increase in dieting over the past few decades is undoubtedly influenced by the pharmaceutical, cosmetic and fashion industries that emphasise the importance of dieting and healthy eating (Fulcher & Scott, 2007: 306). Furthermore, the media have a vital influence on the individual’s food choices (Ogden, 2010: 283). For example, in the summer of 1990 UK beef sales fell by 20% in response to widespread publicity about the health risks of beef (Ogden, 2010: 38). This demonstrates that the media can have a major effect on the food consumers buy. The combination of images in the media, publicity around the benefits and risks of certain foods, and the emphasis on dieting and healthy eating in today’s society contribute to what constitutes normal eating in t oday. Young girls begin controlling their weight from an early age (Bordo, 1993: 99) as a result of media images, and the normalization of dieting means that young girls view dieting as a good tool for weight loss (Fulcher & Scott, 2007: 307). Therefore, we can argue that images of femininity in the media and the emphasis on maintaining a slim figure contribute to the eating habits of the general public, especially women. In addition to this, negative publicity surrounding particular food produce can result in reduced consumption of certain products which highlights the media’s influence on an individual’s food choices.

Introduction to Human Resource Department Term Paper

Introduction to Human Resource Department - Term Paper Example The term paper "Introduction to Human Resource Department" primarily highlights the unionization issues of Chevron Corporation. It will shed light on the strategy adopted by the company in order to cope up with the issue of unionization and offer some suggestions to the company by which it can effectively curb the unionization. Historically the concept of unionization was well acknowledged by several eminent scholars around the globe. However, only a few marked it as an illegal practice. The concept of unionization within the organization was developed in the early 18th century. However, with the passage of time, the system became prominent in different parts of the world. Unionization is a process of forming groups among the workers of an organization. A union is therefore defined as a group of employees who strive to improve the working condition of the employees. Such groups are generally made up of professionals, trainees, students and unemployed persons. Union relies on the fact that joint efforts are better than individual efforts and also helps in achieving the goals more flexible. The principal aims of unions are generally demands for higher pay packages, more leaves, increase the number of employees for a particular job, to improve the condition of working, demand for additional facilities, rules and regulations pertaining to hiring and firing, promotion of workers, procedures for lodging complaints, safety within the workplace and about the different policies of the organization.

Risk Management Program Assignment Example | Topics and Well Written Essays - 750 words

Risk Management Program - Assignment Example Before starting to implement change as a manager, I should ask myself the following questions, what need to be achieved through this change, how will I know that the process has been attained, who will be affected by this process and when change occur how will they react. To proactively manage system change, the following principles should be applied; developing a plane, supporting it, regular communication with the affected people, and involving the main people. The first step should be to involve the key people. This involves top management and other executives whose employees might be affected. The second step is developing a plan that will oversee effective transformation. The plan will define the roles of the main people involved at the same time putting down the short and long term objectives required for changes. This plan should also be flexible to accommodate any occurrence since change is unpredictable. The third step is supporting the plan. The main purpose of this step is to enable employees adapt the changes made; this is because the new structures might require training or hiring other employees. The last step occurs through the process. This involves free communication with the employees frequently about what is happening, why the occurrence is being carried out and how they are developing is significant. Since change can instill fear on the employees, increased communication will be used to remove the fear and encourage their consistent support. As a manager, I should be always around to take suggestion or respond to questions that might arise from the employees. Coming up with employees opportunities to provide they suggestions like holding meetings will facilitate change better. Plans, policies and procedures in an organization ensure that duties and services are carried out in a consistent manner. To create a risk management policy, there are some guidelines that need to be followed; these include the purpose of the policy, how it will be imp lemented, it should be in compliant with the federal, provincial and municipal regulations, and should be documented in writing. In creating a procedure, step by step instructions are created on how to carry out the significant task. Also the supervisor should be contacted if the employee wants to go beyond the given task. Transparency in an organization is important since it ensures efficient running of an organization. To have a transparent organization, as a manager, I should close the perception gap between the senior leaders and lower managers. I should also put in place a mechanism that ensures that there is proper communication between different parties to ensure that vital issues are communicated. And as manager, incase I encounter disappointing things; I should treat employees as adults with respect. A risk management plan is a document that is created and it outline how the risk management process will be organized, the phases it will have, the way it will be carried out a nd those who will be involved. The following steps are followed in designing a risk plan; one is making a list of potential risks. Everything should be documented include the small things. All the categories of the project should be listed and every risk should be evaluated. For example if it is a cost category, the factors that may raise the cost should be determined and listed. The second is

The Balkan States, 1876-1914 Essay Example | Topics and Well Written Essays - 500 words

The Balkan States, 1876-1914 - Essay Example However as the event unfolded after 1908 as â€Å"in the ensuing Balkan Wars of 1912-13, Serbia obtained northern and central Macedonia, but Austria compelled it to yield Albanian lands that would have given it access to the sea. Serb animosity against the Habsburgs reached a climax on June 28, 1914, when the Austrian archduke Franz Ferdinand was assassinated in Sarajevo by a Bosnian Serb, Gavrilo Princip, setting off a series of diplomatic and military initiatives among the great powers that culminated in World War I.† (US Department of State). The rising tension between the two entities and the resulting conflict thus brought about the World War I. Further it was also a conflict of interest as both the countries tried to legitimize their powers in the region. Austria being the country largely responsible for weakening Turks claimed to have more territory under its control whereas Serbia refused to budge to the excessiveness of Austria thus both the countries were at odd during Balkan wars. It is largely being argued that the nationalism was one of the main thrust behind the first and the second Balkan War as Nationalism worked as a force to compel Europe to go far war. Tracing the history of the region, it would be evident that right from the Ottoman rule in the region to the last Balkan war of 1990s, Nationalism has emerged in the form of various sub-identities and sub-cultures which virtually divided the region and brought about the bitter consequences of the war. It is also believed that Nationalism emerged within the Balkan region mainly due to the conditions of the social structure within the region. The region was largely village based with strong differences between the rural and the urban areas. Further, with influx of Turks, most of the population of Serbia especially embraced Islam which gave the issue of nationalism a whole new face in the region. The historical roots of this

Summary for FAITH integration readings Essay Example | Topics and Well Written Essays - 500 words

Summary for FAITH integration readings - Essay Example Throughout the Bible, there are ideas and inferences that touch on the aspect of supply and demand in relation to the necessities of faith. One of the most important necessities of faith is the grace of God, upon which all other elements of Christianity and biblical spirituality are based. There are relations that connect the Biblical reference to grace and sin to the supply and demand elements of economics. This bearing is brought through the correlation between the offence of one man, Adam, and the subsequent death that resulted, and the grace and gift of righteousness that is bound to result from Christ (International Standard Version Rom. 5:17). From this, we can note that there is a relationship that exists between grace and sin according to the existences of both Adam and Jesus Christ. Additionally, there are elements of supply and demand in light of the relationship between sin and death such that as much as sin brought death, the Lord’s grace reigns through righteousne ss unto eternal life (International Standard Version Rom. 5:20-21). Therefore, the relationship that exists between grace and sin is of a supply-demand nature, and as such, grace counters whenever sin increases and sin also monitored by the grace and righteousness, much like in economic parlance. Still on the economic bearing, the grace of God has a price to it, which is following Jesus Christ. In supply and demand, the element of price plays a critical role in determining the equilibrium between the two forces (Marshall 228). The only way to grace and righteousness, therefore, is through embracing Christ and living by the ideals of righteousness. In this way, Christ is a representation of the grace of the Lord, and it is the only means for attaining righteousness. Therefore, the whole relationship between sin and grace or righteousness is based on the need and ability to

Microsoft Management Term Paper Example | Topics and Well Written Essays - 1500 words

Microsoft Management - Term Paper Example This company has helped to alter the living, working, and recreational behavior of hundreds of millions of public around the world (History link.org, 2000). Additionally, Microsoft entered the operating system (OS) business in 1980 with its own version of UNIX, called Xenix. However, Disk Operating System (DOS) ultimately proved the company's dominant power. After the breakdown of the discussion with Digital Research, IBM granted the contract to Microsoft in November 1980 to provide a version of the CP/M operating system. It was set to be utilized in the upcoming IBM Personal Computer (IBM PC). By December 1982, Microsoft approved DOS to 50 additional manufacturers. Millions of IBM "clones" were being sold, and were powered by MS-DOS. Soon after, in 1983, the Graphical User Interface (GUI), which facilitates representation of computer programs and files through icons and other graphics on the screen of the computer, was launched. The success of MS-DOS led to invention of a new operat ion system OS/2 in 1984 and also release of Microsoft Windows (United States Securities And Exchange Commission, 2011). Subsequently, Microsoft introduced its Office collection, ‘Microsoft Office’, in 1990. The software bundled distinct office use applications, such as Microsoft Word and Microsoft Excel. As the early versions of Windows were unsuccessful, so Windows 3.0 was launched with an efficient graphics user interface and superior ‘protected mode capability’ for the Intel processor. This idea made both MS Office and MS Windows foremost in their respective areas. The company also diverted into software applications, by creation of certain programs that allow computers to perform specific tasks, such as word processing and spreadsheets. It also began producing Compact Disk--Read Only Memory (CD-ROMs) (United States Securities And Exchange Commission, 2011). In the year 1995, Microsoft redefined its assistance and extended its products into ‘networ king’ along with the ‘World Wide Web’ and also with ‘Windows 95’. Windows 95 was an entirely innovative user interface with a narrative start button. It also provided 32-bit compatibility as well as the MSN, an online service, and Internet Explorer for Original Equipment Manufacturers (OEMs), a web browser. In 1998, Microsoft enjoyed its monopoly in the field of operating systems. Moreover, by 2001, Microsoft established Windows XP. It became very successful and also acquired a reputed position in the market. In 2004, new version of Windows XP was developed and later in 2007, Windows Vista and Microsoft Office 2007 came into existence (History link.org, 2000). Thus, it can be stated that Microsoft, with its immense inventions marked its path as an industrial giant. Empowerment Human Resource Management (HRM) includes the administration of people in an organization in order to form a collective relationship between management and employees. This appro ach focuses on the proper functioning of the organization. Human resource management includes various processes such as work force planning, training and development, empowerment and employee appraisal among others (Mathis & Jackson, 2010). Empowerment is a part

How Different Actual Practice of Law is from Law School Essay

How Different Actual Practice of Law is from Law School - Essay Example My placement experience helped me to realize how different the actual practice of law is from law school. According to McDockery, â€Å"the study of law is different from the practice of law†*3 and he highlights the fact that apart from writing and research skills, not much of what is learned at law school will be particularly relevant in practice. My placement experience corroborated this claim because I discovered that mere academic knowledge and the theory of law is not as important as interacting well with clients and professional code and ethics in actual practice. It was a revelation to me, as I watched my supervisor interacting with our clients and I realized that legal interviewing needs to be approached from a different angle as compared to other interviews.*4 The fact-finding mission that this entails often meets with subtle resistance from clients and especially poses a challenge when dealing with clients who are not familiar with English since there is a possibilit y for distortions during translation.*5 Such clients are often unaware that client privilege is their fundamental civil right as established by the Courts*6 and they are reluctant to be completely honest with their lawyers. But this was not the only area where I discovered that practice is different from theory. While law school provided me with the background of the law, actual practice concerns the application of the law. Earlier, my understanding of the law was directed towards its mechanics, whereas I obtained a clearer perspective of the law that conditions a lawyer’s actions during my placement experience. As Bernie Marden puts it, professions today operate in a world where â€Å"public policy applies regulation, co-regulation, and self-regulation in varying degrees†*7 and this is why it was deemed necessary to introduce the Professional Standards Act of 1994 in Australia.  Ã‚  

Case Study Healthcare Funding Policies Term Paper

Case Study Healthcare Funding Policies - Term Paper Example 5 Works Cited 9 Name of the Student Name of the Professor Name of the Course Date Healthcare Funding Policies INTRODUCTION: HEALTH CARE POLICIES Presently, the costs of healthcare policies, intricacies in healthcare systems, cost challenges, and various other factors are responsible for the increase in the demand of the health care policies. Health decision making is vital to the growing economy as it ensures the welfare of the people and also has a profound impact on the socioeconomic, political, and cultural context. The different funding methods have different impact on the public health decision making and its way of choosing the regulatory mechanisms. The health care systems of varied nations are largely influenced by the guidelines prepared by World Health Organization (WHO). Similarly, the health care systems in the USA encompass various regulations that are enacted by the US government like Health Care and Education Reconciliation Act of 2010 and Patient Protection and Afford able Care Act. The US government plans to impose further regulations for the benefits of the common people. Health care policies of the USA will be introduced in the study and its benefits to the common people. ... HEALTH CARE POLICIES: UNIVERSAL HEALTH CARE POLICIES The growing health concerns among the common people, regarding the health care system in varied nations have led to frustration. Situations like overcrowded emergency rooms, extra fees for health care facilities and non government aid for health benefits are also regarded as important health issues (Jackson). Apart from health care policies, which are largely influenced by the government regulations, the health care policy consensus group is a collaboration of organizations, which signify various points on the continuum and the spectrum (â€Å"How US health care reform will affect employee benefits†).The key features of the universal health care policies are price consciousness, consumer empowerment, social solidarity, quality of healthcare, clinical autonomy, responsiveness, conflicts of interest etc. In the United Kingdom the health care facilities provided by the government are largely based on need and not the ability to pay. The National Health Services (NHS) provided by the government are free and provide medical facilities worth ?2400 annually. The UK health care policies are designed to keep in the mind the age, sex, education, race, and class of the common people. The social and health care insurance is designed by the government keeping universality, price regulation, open enrolment, and a regular benefits package system. Universality includes compulsory insurance, which includes subsidization for the sick and healthy patients. Price regulation includes risk compensation for the insurers especially for the highly risk ensured (Singh & Kant 200). In the USA the health mechanism is given due consideration and is not regarded as a gift,

Attributes of Professional Bartender Essay Example for Free

Attributes of Professional Bartender Essay Bartenders know the difference between art and science. They understand that bartending is a science because in mixing drinks there are rules to follow, standards to obey and procedures to do. It is not just pouring all the drinks together in one glass and then serve it. Bartending is also an art because bartenders make an art form out of their profession. Aside from following the standards, they also use their creativity, imagination and individual way of enhancing the usual preparation of the beverage for the purpose of visual perception, odor detection, and taste stimuli. Professional bartenders possess many skills and characteristics that make them successful. 1. Good personality A bartender must have an ability to interact well with different people. He knows how to show his best asset as a bartender when he is in front of the guest. The totality of the bartender can be seen not only with his physical attributes but also through his words, actions and way of thinking. 2. Sense of humor Bartending is a serious job. This needs focus and presence of mind. But, a good bartender knows how to work properly, yet, laugh that sometimes, cracking jokes is being part of his functions. It is nice to learn that laughing is still the best medicine especially in front of unpredictable guests. 3. Well – groomed A bartender must have good personal hygiene; maintaining oneself healthy, wearing clean clothes and proper attire, keeping hair, teeth and fingernails clean and sanitary. A well – groomed appearance helps bartenders seem more approachable and professional. 4. Physical stamina Bartending is a job that requires long hours standing while preparing, mixing, serving and bussing out soiled glasses behind the bar counter. Sometimes, part of this is lifting heavy boxes and cases of drinks to set up the bar. A bartender must be physically fit and strong enough to do the day-to-day activities in the bar. 5. Basic skills in Math In bartending, the fundamental operations in Mathematics are applied. The skills learned about this in school allow the bartenders to make changes and measure drinks accurately and quickly. It also helps the bartender as well as the managers to realize their profit versus expenses at the end of every operation. 6. Multi – tasking Bars are busy especially peak nights and salary days. The bartender must make sure everything runs smoothly during his shift by learning what and how to do other tasks aside from mixing and preparing drinks. 7. Good memory Bartenders need to remember everything from drink recipes to customers’ names. Even brands of drinks, proof, country of origin, and major ingredients are needed to remember when a bartender presents and serves beverages to guests. 8. Great smile A great smile is a key since bartenders smile a lot. It does not only makes the bartender good looking and presentable, but this helps attract guests, let them feel that they are very welcome and a smile will make the first time guest, a regular guest. Bartenders must be aware of everything around them at all times. They have to know the drink levels of everyone’s beverage, and must see new customers as they approach the bar. A second set of eyes in the back of their heads would be a remarkable evolutionary improvement and in failing that, bartenders need to be constantly alert.

Data Analysis for Research Essay Example for Free

Data Analysis for Research Essay Scenario 1: Customer Perceptions of the Toyota Brand WKB Toyota in Chichester want to investigate customer attitudes towards the Toyota brand, to see if the press coverage regarding mechanical failures during 2009-2010 have had any long-term impacts on customer loyalty and potential sales to new customers. In the first instance, WKB can offer access to their own marketing database. Scenario 2: Market Segmentation for Visit Chichester Visit Chichester is in the process of realigning its marketing strategy to key customer groups in order to more effectively promote the visitor economy in the Chichester District. As part of the process they wish to conduct research to investigate current attitudes towards the Visit Chichester website. They wish to seek views from across a range of profiles including families with children, couples, and the retired market. The results will be used to determine the structure and content of the new Visit Chichester website. Scenario 3: NatWest Banking Charter Following its widespread publicity campaign, which included TV adverts and street billboards, and as part of its commitment to customer service, NatWest wish to undertake research to establish the impact of its Customer Charter. More specifically, they want to ascertain whether it has lead to a discernible improvement in customers’ perception of the bank’s service quality. They also wish to undertake an internal audit to assess whether staff have noticed an impact of the Charter. Scenario 4: The Green Economy The West Sussex Sustainable Business Partnership has commissioned the University of Chichester undertake research assessing the level of sustainable business practice by businesses across a range of sectors in West Sussex. Specifically the WSSBP would like to establish the extent to which businesses are adopting green measures in key areas such as operations management, purchasing, and energy management. They also want to establish business awareness of available support for going green, and general business attitudes to the green agenda. The results will help WSSBP help businesses prepare for the green economy being championed by the coalition Government. Scenario 5: HMV Music In the light of poor trading figures, and the imminent closure of 60 of its UK branches, HMV want to undertake research to ascertain the factors that are causing poor sales and determine which product lines should be continued and which ones should be discarded. They are also interested in how they can improve their online sales performance as part of a realignment of their retail strategy. Scenario 6: Tourism Industry Response to Recession and Recovery The Sussex Tourism Partnership have commissioned the University to undertake research into the impact of recession on the tourism industry in Sussex, and the strategic response adopted by tourism businesses, including accommodation providers and attractions. They wish to establish the degree to which different sectors have felt the impact of recession, either positively or negatively, and identify the key measures these businesses have taken to remain competitive in the current downturn. Scenario 7: Evaluation of Goodwood Motor Racing Events The Goodwood Road Racing Company (GRRC) has commissioned the University of Chichester to undertake research investigating visitor perceptions of the overall quality of the visitor experience at the Goodwood Festival of Speed and Revival. They also want to assess visitors’ views about potential new events, products and services that could be developed at Goodwood that would increase revenue without significantly increase the negative impacts currently generated by the Festival of Speed and Revival events. Scenario 8: Green policies at Sainsbury PLC The aim of the research is to establish whether there are any economic benefits from adopting green business policies at Sainsbury supermarkets. The supermarket’s Operations Manager wants to identify ways in which the economic impacts of Sainsbury’s adoption of green business polices can be measured. In particular, she is interested in the identification of costs and benefits associated with implementing green business policies at Sainsbury, and to identify the economic incentives and disincentives which Sainsbury has from its stakeholders such as customers, suppliers and government to adopt green business policies.

Method for Measuring the Area of Radiometric Apertures

Method for Measuring the Area of Radiometric Apertures ERREIRA DA   Method for measuring the area of radiometric apertures using the ratio of Gaussian beams I propose and demonstrate a method for determining the area of radiometric apertures using the power ratio between Gaussian beams. The result relies on measuring the power of an optical beam of known radius with and without the radiometric aperture. The impact of the characterization of the laser beam and of the radiometric measurements on the area estimation is discussed and a 3-mm in-diameter sample is measured for validation. The contactless method is fast and simple and results in a relative uncertainty of 0.12%.   Calibration of the area of an aperture is necessary for radiometric and photometric measurements, including spectral irradiance [1- 4] and the realization of the SI unit candela [5-7]. The plethora of methods reported in literature can be assorted whether they are contact or contactless. Contact methods include probing the aperture border with an stylus, which position is mapped by an interferometric system [8]. Contactless methods are preferable as the possibility of damaging the sharp edge of the aperture during the measurement is avoided. A camera with an objective lens can be used for taking digital pictures of parts of the inner perimeter of the aperture, while an interferometric system is used for measuring the displacement of the images, allowing them to be further stithed together [9]. Another approach consists in raster scanning the aperture relative to a laser focused in a small spot in the aperture plane to determine the diameter at some radial angles [10]. Methods based on radiometric ratios have also been reported and depend on comparing measurements performed with a light overfilled aperture and a reference value. A spatially-uniform beam emerging from an integrating sphere can be used to compare the radiometric values obtained with the aperture under calibration and with the reference one [11]. Similarly a matrix of small-spot laser sources can be used [12, 13], with the reference provided by the known uniform irradiance distribution. In this paper I propose a method for determining the area of a radiometric aperture using the ratio between Gaussian laser beams. The result is obtained from measurements of the optical power transmitted through the overfilled aperture compared to the total optical power without the aperture, with the beam radius at the aperture plane previously characterized. The technique is contactless and the measurement is relatively fast, providing an alternative way for measuring radiometric apertures. A. Model The method proposed for determining the area of the aperture is based on measuring the radiometric ratio between the beam limited by the aperture and the full beam. Consider a Gaussian beam propagating along the zˆ  axis with an intensity distribution in the radial direction à Ã‚  on the transversal plane described as I (1) where the beam radius à Ã¢â‚¬ ° (z) is [14] (2) and the waist radius is à Ã¢â‚¬ °0 = à Ã¢â‚¬ ° (0). The beam radii in the analysis are taken at 1/e2 of the maximum intensity. The total optical power of the beam is obtained by integrating its intensity over the transversal area as   Ã‚   Ptotal /2(3) The circular radiometric aperture is modelled as a Boxcar function with mean radius r à Ã¢â‚¬ ° (z) and transmittance given by g (x, y) = rect(4) Positioning the aperture in the plane orthogonal to the beam axis at à Ã‚ =0 reduces the measured optical power in eq. (3) to Z r Pap (z) =I (à Ã‚ , z) 2à Ã¢â€š ¬Ãƒ Ã‚ dà Ã‚ (5) 0 The ratio between the optical power limited by the aperture at position z and the total optical power of the beam is thus [14] (z)2r2 R(6) The radius of the aperture is obtained by inverting eq. (6), resulting in r (7) Equation (7) reveals the dependence of the aperture radius on the beam radius à Ã¢â‚¬ ° and radiometric ratio R measured at a given axial position. The sensitivity coefficients of the radius equation relative to those components are 2(8) (z) The uncertainty of the measured area is composed [15] as ur (9) The area of the radiometric aperture is then trivially obtained from the circle formula, S = à Ã¢â€š ¬r2, with uncertainty given by uS = 2à Ã¢â€š ¬rur. B. Method The first step of the method is the determination of the longitudinal profile of the Gaussian beam. This can be accomplished in practice by using the knife-edge scanning method [16] or using a spatially-resolving photodetector (for example, a CMOS or CCD camera). While the later can be troubling for beams wider than the sensitive area of the camera, the primer requires caution relative to radial asymmetries in the beam profile. The astigmatism of the beam must be verified by knife-edge scanning along orthogonal directions in the transversal plane and the mean radius is considered. The beam longitudinal profile reveals important information about the tolerance of the axial positioning of the aperture relative to the transversal plane where the beam is determined. Next step consists on positioning the aperture in the beam path. Carefully placing the aperture front plane at the axial position where the beam has been characterized avoids the need for a correction on the beam radius value. The aperture under measurement must then be centralized relative to the beam axis. A recursive gradient search can be performed along the plane axes until convergence at the maximum optical power, where à Ã‚ Ãƒ ¢Ã¢â‚¬  Ã¢â‚¬â„¢ 0. The value of the optical power measured with the aperture is compared to the total optical power measured without it. This ratio and the mean beam radius are substituted in eq. (7) and the aperture radius is determined. Research Article Applied Optics 2 A laser diode with continuous-wave emission at 633 nm is collected with an objective lens into a meter-long single-mode optical fiber (Thorlabs SM600 [17]), which acts as a spatial filter by selecting the LP01 transversal mode. The beam is launched into free-space through the tip of an FC-PC connector and collimated using an 1-large AR-coated plano-convex lens (L2) with a focal length of 38.2 mm, as illustrated in Fig. 1. A similar lens (L3) with 150-mm long focal length focuses the beam into the photo-detector. Fig. 1. Experimental setup. LD: laser diode; L: plano-convex lens; C: fiber connector; PD: photo-detector; PC: personal computer. The beam profile is determined using the knife-edge method. A pair of razor blades is scanned in the plane orthogonal to the optical beam in both xˆ  (horizontal) and yˆ  (vertical) directions, using a pair of linear actuators (Newport TRA25PPD and CMA25PP). The optical power is measured by an optical power meter with a diffuser probe (Thorlabs PM100). Data acquisition and transversal positioning of the knives and aperture are performed with a personal computer. Flip mounts allow for selecting either the knives or the aperture, which are placed in the same xˆ  à ¢Ã‹â€ Ã¢â‚¬â„¢ yˆ  translation stage. The translation stages, the lens L3 and the photo-detector are fixed into a platform and move together to the desired position in axial direction zˆ . The aperture under characterization has nominal diameter of 3 mm and is built in anodized aluminium with sharp edges. The offset distance between the planes of the knives and the aperture is set within 0.05 mm using a multi-probe optical reflectometer [18]. An automated routine is used to position the aperture in the transversal plane relative to the optical beam by scanning it along xˆ  and yˆ  directions until it is centralized. The radiometric ratio is obtained by removing and reinserting the aperture using the flip mount while the power is measured using a silicon photodiode (Hamamatsu S1227-1010BQ) in photovoltaic mode. Calibrated trans-impedance amplifier (LabKinetics Vinculum) and digital voltmeter (Agilent 34401A) are used. Conditioning the signals for using a single range of these devices avoids linearity issues. The detector typical linearity is better than 10à ¢Ã‹â€ Ã¢â‚¬â„¢5 [19]. A. Beam width The width of the Gaussian beam is determined at different positions along the axial direction in both horizontal and vertical axes. Figure 2 shows a sample of the transversal beam profile Fig. 2. Sample of the transversal intensity profile of the beam. The slices in the details cross the center and are Gaussian fit. The longitudinal profile of the beam is evaluated by applying the knife-edge analysis at different axial positions. The optical power measured as a function of the knife position in xˆ  direction is modelled as the integral of the Gaussian intensity, resulting in the error function: P (10) Equation (10) indicates that the measured power profile reveals the horizontal beam radius à Ã¢â‚¬ °x (z). The procedure performed along the yˆ  direction returns a similar result as a function of the vertical beam radius à Ã¢â‚¬ °y (z). Figures 3a and 3b show the power measured with the knifeedge method along both xˆ  and yˆ  directions, respectively. A group of 10 scans, with 0.25-mm steps, is taken at a given axial position. Data is interpolated to steps of 0.1 mm using piecewise cubic Hermite interpolating polynomials [20]. Non-linear curve fit (Levemberg-Marquadt method) is globally applied to data with the beam radius parameter shared by all curves in the group. The beam radius values as a function of the axial distance to the collimating lens are shown in Fig. 3c. Observe that the beam profile behaves linearly at the sampled axial positions. Fitting data with eq. (2) reveals the horizontal and vertical waists localized at about 3.3 m and 3.7 m, respectively. The slope of 10à ¢Ã‹â€ Ã¢â‚¬â„¢4 indicates that a positioning error between the knives and the aperture of 0.05 mm has negligible impact on estimated radius. The beam is slightly astigmatic (horizontal radius about 1% greater than the vertical one), so the average radius is computed from both horizontal and vertical radii as /2(11) B. Radiometric ratio The radiometric ratio is determined from five groups of measurement of the total beam power, alternated with four measurements of the power limited by the aperture. Interleaved measurements allows for data interpolation and avoids slow drift effects. Each measurement is composed by a group of 30 data points, corrected by the dark measurement. Three measurement were performed at each axial position. The calibration data of the trans-impedance amplifier and voltmeter are used for correction and considered in the uncertainty budget see next section. The average ratio of 0.3373 allows for performing both measurements (with and without the aperture) in the same scale of the amplifier and voltmeter. Keeping the measurement range of the equipment fixed avoids linearity issues, which must otherwise be corrected and could burden on the uncertainty budged. C. Aperture radius/area and uncertainty budget The aperture radius is computed from the measured values of à Ã¢â‚¬ ° (z) and R (z) using eq. (7). The result obtained at three different axial distances from the collimating lens are presented in Fig. 4a. The uncertainty budget for the radius measurement is presented in Table 1. The uncertainty of the beam width and power ratio are combined with the reproducibility of the measurement. The radius measurement is obtained from the global fit of the knife-edge scan measurements. The impact of the beam divergence is obtained by multiplying this value by the maximum axial offset between the knife-edge and the aperture plane. The beam width uncertainty is dominant over all other components. Improvements over this estimation would greatly benefit the final uncertainty. The repeatability comes from the statistics of the ratio measurements. Stability of the laser source is the major component and could be iproved using a further power stabilization closedloop. The amplifier and voltmeter uncertainties are obtained Fig. 4. Experimental results: (a) aperture radius measurements and (b) its final area. The reference values are certified results. Standard uncertainties represent k=1. Table 1. Uncertainty budget for the measurement of the aperture radius (relative values). Component Type Uncertainty (k=1) Radius measurements B 5.3 ÃÆ'- 10à ¢Ã‹â€ Ã¢â‚¬â„¢4 Beam divergence [mm] B 2.3 ÃÆ'- 10à ¢Ã‹â€ Ã¢â‚¬â„¢5 Trans-impedance amplifier B 6.3 ÃÆ'- 10à ¢Ã‹â€ Ã¢â‚¬â„¢5 Voltmeter B 5.5 ÃÆ'- 10à ¢Ã‹â€ Ã¢â‚¬â„¢5 Photodiode linearity B 6.2 ÃÆ'- 10à ¢Ã‹â€ Ã¢â‚¬â„¢6 Power ratio 0.00017 Reproducibility [mm] A 0.00027 Aperture radius [mm] 0.00062 from their calibration uncertainty and from the linear regression over the measurement range. The photo-diode linearity is taken from literature. The reproducibility is taken from the independent repetitions. Among other factors, it accounts for small room temperature variation (oC), different axial positions, and repositioning of the aperture center relative to the beam axis. The final relative uncertainty obtained for the measurement of area is 0.12%. The validation of the method is assessed by comparing the results to a certified value, as shown in Table 2. The certificates present a relative uncertainty (k=1) of 0.0065 mm2 for the area value and a calibration drift (rectangular distribution) between bi-annual measurements of 0.0410 mm2 is observed, composing a combined uncertainty of 0.415 mm2. Research Article Applied Optics 4 Table 2. Experimental results and validation (k=1). Measured area Certified Relative Normalized [mm2] area [mm2] difference [%] error 7.0056  ± 0.0087 6.998  ± 0.042 0.11 0.18 The relative error between the measured and certificated values is 0.11%, while the normalized error [15] is below unit, indicating the compatibility of the results. The coverage factor of the measurements, calculated for a confidence interval of 95.45%, is k=2. The area of an aperture impacts directly on the determination of some radiometric and photometric quantities. This paper presents a simple and fast contactless method for characterizing an aperture area through the measurement of radiometric ratio of characterized Gaussian beams. The model is presented and the measurement uncertainty budget is discussed. The results are validated and indicate the method as suitable for metrology applications. References       M. White, N. P. Fox, V. E. Ralph, and N. J. Harrison, The characterization of a high-temperature black body as the basis for the NPL spectralirradiance scale, Metrologia 32, 431-434 (1995/96). P. Sperfeld, K.-H. Raatz, B. Nawo, W. Mà ¶ller, and J. Metzdorf, Spectralirradiance scale based on radiometric black-body temperature measurements, Metrologia 32, 435-439 (1995/96). P. Kà ¤rhà ¤, P. Toivanen, F. Manoochehri, and E. Ikonen, Development of a detector-based absolute spectral irradiance scale in the 380-900-nm spectral range, App. Opt. 36, 8909-8918 (1997). H. W. Yoon, C. E. Gibson, and P. Y. Barnes, Realization of the National Institute of Standards and Technology detector-based spectral irradiance scale, App. Opt. 41, 5879-5890 (2002). L. P. Boivin, A. A. Gaertner, and D. S. Gignac, Realization of the New Candela (1979) at NRC, Metrologia 24, 139-152 (1987). T. M. Goodman and P. J. Key, The NPL Radiometric Realization of the Candela, Metrologia 25, 29-40 (1988). E. Ikonen, P. Kà ¤rhà ¤, A. Lassila, F. Manoochehri, H. Fagerlund and L. Liedquist, Radiometric realization of the candela with a trap detector, Metrologia 32, 689-692 (1995/96). J. E. Martin, N. P. Fox, N. J. Harrison, B. Shipp, and M. Anklin, Determination and comparisons of aperture areas using geometric and radiometric techniques, Metrologia 35, 461-464 (1998). J. Fowler and M. Litorja, Geometric area measurements of circular apertures for radiometry at NIST, Metrologia 40, S9-S12 (2003). J. Fischer and M. Stock, A non-contact measurement of radiometric apertures with an optical microtopography sensor, Meas. Sci. Technol. 3, 693698 (1992). V. E. Anderson, N. P. Fox, and D. H. Nettleton, Highly stable, monochromatic and tunable optical radiation source and its application to high accuracy spectrophotometry, App. Opt. 31, 536-545 (1992). A. Lassila, P. Toivanen and E. Ikonen, An optical method for direct determination of the radiometric aperture area at high accuracy, Meas. Sci. Technol. 8, 973977 (1997). E. Ikonen, P. Toivanen and A. Lassila, A new optical method for high-accuracy determination of aperture area, Metrologia 35, 369-372 (1998). B. E. A. Saleh and M. C. Teich, Fundamentals of photonics, 2nd ed., 2007. JCGM 100:2008, Evaluation of measurement data Guide to the expression of uncertainty in measurement, 1st ed., 2010. M. A. C. Araà ºjo, R. Silva, E. Lima, D. P. Pereira, and P. C. de Oliveira, Measurement of Gaussian laser beam radius using the knife-edge technique: improvement on data analysis, App. Opt. 48, 393-396 (2009). Some equipment and components are cited for the sake of clarity and this does not mean endorsement or recommendation. T. Ferreira da Silva, Multi-probe remote differential optical lowcoherence reflectometer, Microw. Opt. Technol. Lett. 58, 2606-2609 (2016). A. Haapalinna, T. Kà ¼barsepp, P. Kà ¤rhà ¤, and E. Ikonen, Measurement of the absolute linearity of photodetectors with a diode laser, Meas. Sci. Technol. 10, 1075-1078 (1999). https://www.mathworks.com/help/matlab/ref/pchip.html (accessed in 10/24/2016).

Pouring Postmodernism into the Computer :: Internet Technology Essays

Pouring Postmodernism into the Computer "I can't define it, but I know it when I see it," has become a standard reply to questions that are hard to answer, now serving as the definition of more than just pornography. Postmodernism seems to at times share this elusive definition. To paraphrase Lyotard, its refusal to take solace in and unified form and conventions are partly responsible for its apparently shapeless definition. Paraphrasing Sherry Turkle, computer culture realizes postmodern concepts, especially a realization of those concepts pertaining to the nature of the self (17-19). For Turkle and others, partaking in chat rooms, creating identities on the computer, and the structure of computer software itself all concretize a previously abstract set of postmodern concepts. Before summarizing segments of Turkle's Identity in the Age of the Internet, a short background on postmodern concepts of the self is helpful. Postmodern thought rejects the idea of a deeper self that can be discovered by rationally peeling away surface layers of that self. The idea that truth can be found by this process, on a personal level or in a narrative structure, is a point of contention. As Stephen Frosh says in Social Experience and the Constructed Self, "More generally, postmodernism opposes all tendencies to take refuge in any illusion of wholeness or of received wisdom†¦" (277). Thus, enlightenment-age scientific approaches to uncover knowledge fall under the "illusion of wholeness and received wisdom." Instead, postmodernism perceives the world through a large network of interconnected but meaningless things and experiences (Frosh, 282). Frosh's opinion of self and action is also revealing: "†¦gone is the differentiation between the self and its expression†¦.Meaning does not precede these practices, but is enigmatically created by them†¦" (280). This is to say that in the writing of a book for example, meaning is produced by the text. The author ceases to be a sort of creator, with a preconceived plan. The book's meaning is transitory, as readers may have several different experiences with a book, regardless of the author's intentions. Finally comes the idea of the self as a social construct. To make sense of the world around us, some have suggested that the self is created in order to give a reference point for existence. Self-construction gives our lives meaning because it allows us to make sense of what surrounds us. I am me. That house across the street is not me, neither are the people who live in that house. Pouring Postmodernism into the Computer :: Internet Technology Essays Pouring Postmodernism into the Computer "I can't define it, but I know it when I see it," has become a standard reply to questions that are hard to answer, now serving as the definition of more than just pornography. Postmodernism seems to at times share this elusive definition. To paraphrase Lyotard, its refusal to take solace in and unified form and conventions are partly responsible for its apparently shapeless definition. Paraphrasing Sherry Turkle, computer culture realizes postmodern concepts, especially a realization of those concepts pertaining to the nature of the self (17-19). For Turkle and others, partaking in chat rooms, creating identities on the computer, and the structure of computer software itself all concretize a previously abstract set of postmodern concepts. Before summarizing segments of Turkle's Identity in the Age of the Internet, a short background on postmodern concepts of the self is helpful. Postmodern thought rejects the idea of a deeper self that can be discovered by rationally peeling away surface layers of that self. The idea that truth can be found by this process, on a personal level or in a narrative structure, is a point of contention. As Stephen Frosh says in Social Experience and the Constructed Self, "More generally, postmodernism opposes all tendencies to take refuge in any illusion of wholeness or of received wisdom†¦" (277). Thus, enlightenment-age scientific approaches to uncover knowledge fall under the "illusion of wholeness and received wisdom." Instead, postmodernism perceives the world through a large network of interconnected but meaningless things and experiences (Frosh, 282). Frosh's opinion of self and action is also revealing: "†¦gone is the differentiation between the self and its expression†¦.Meaning does not precede these practices, but is enigmatically created by them†¦" (280). This is to say that in the writing of a book for example, meaning is produced by the text. The author ceases to be a sort of creator, with a preconceived plan. The book's meaning is transitory, as readers may have several different experiences with a book, regardless of the author's intentions. Finally comes the idea of the self as a social construct. To make sense of the world around us, some have suggested that the self is created in order to give a reference point for existence. Self-construction gives our lives meaning because it allows us to make sense of what surrounds us. I am me. That house across the street is not me, neither are the people who live in that house.

The Problems With Low Carbohydrate and Low Fat Diets Essay -- Health N

The Problems With Low Carbohydrate and Low Fat Diets The low carbohydrate diets and the low fat diets both claim to be successful methods of losing weight and staying healthy. Both diet plans also attempt to carry out their goals by restricting what dieters can and cannot eat in relation to what is recommended by the US Department of Agriculture (USDA). Through altering what nutritionists suggest for a healthy regime, low carbohydrate and low fat meal plans potentially put dieters at a higher risk for developing health problems and diseases. Also, diet plans do not necessarily accomplish their goals when maintained over a long period of time. Diets set regulations on what should or shouldn’t be part of a daily nutritional intake. The USDA recommends between 2-5 servings, measured at about one cup per serving, each day from the dairy, protein, fruit, and vegetable food groups, with an additional 6-11 servings of carbohydrates. Low carbohydrate meal plans and low fat meal plans direct dieters to follow nutritional schedules that contrast with the USDA recommended diet plan. Low carbohydrate diets, such as the Atkins diet, significantly lower the daily carbohydrate intake while increasing the amounts of servings from the meat, dairy, and other groups. On the other hand, low fat diets such as the Weight Watchers diet instruct that dieters should consume more servings of carbohydrates and less of fatty foods and foods with animal fats, which include foods from the meat group, dairy products, and others. Both diets largely differ from each other as well as from the USDA recommended meal plan. Carbohydrates, which are chemical compounds such as sugars, starches, and celluloses, are converted by the body into energ... ...r health problems. Diets can be helpful or hazardous to ones health, depending on how they are followed. Works Cited â€Å"The Food Guide Pyramid,† USDA. http://www.pueblo.gsa.gov/cic_text/food/food-pyramid/main.htm â€Å"Low Fat Diets,† Diet-i.com. http://www.diet-i.com/diets/low-fat-diet.htm â€Å"Atkins – The Unhealthy Choice,† Sims, Jeremy. http://www.weightlossresources.co.uk/diet/atkins_diet/medical_report.htm â€Å"Low Carb Diet- How Do Low Carbohydrate Diets Work?† http://www.weightlossresources.co.uk/logout/news_features/lowcarbdiet.htm UC Berkeley Wellness Letter http://www.berkeleywellness.com/html/fw/fwNut02LowFatDiets.html 1 Sims, http://www.weightlossresources.co.uk/diet/atkins_diet/medical_report.htm 2 UCB, http://www.berkeleywellness.com/html/fw/fwNut02LowFatDiets.html 3 Sims, http://www.weightlossresources.co.uk/diet/atkins_diet/medical_report.htm

Feline Companionship in Cat in the Rain Essay -- Cat in the Rain Essay

Feline Companionship in Cat in the Rain I chose to write about Hemingway's "Cat in the Rain" in part because it is one of the few of his stories I have read which has an "ending." There is a specific event at the end of the story which wraps up the story's events and gives the reader a sense of finality not found in most of Hemingway's short works. Written in his characteristic sparse style, "Cat in the Rain" is seemingly simple in plot and character, but a careful reading reveals deeper meaning behind its elements. The American wife's quest to save a kitty from the pouring rain becomes a more complex statement about her frustration and her isolation from human comforts. I think the portrayal of the wife captures these feelings which many women can recognize. In the first paragraph, the theme of isolation is introduced, as the author tells about the American couple on foreign soil with no friends or acquaintances. He also describes the beautiful park below the window and the many people who come to enjoy it, only to add that it is now raining and the wife may only look out the window and dream. The wife soon sees the poor cat, getting drenched in the rain and feels sympathy for it. Her reading husband is indifferent to her discovery, except to volunteer half-heartedly to get the cat (most likely to keep her from complaining). The woman can not seem to connect with her husband, who treats her almost like an annoying child, as much as with the pathetic cat outside. As she ventures out of the room to rescue the cat, she first passes the hotel-keeper in his office. In a series of parallel phrases, the author describes the hotel-keeper, or padrone, and what the woman likes about him. This passage sho... ...he husband's complacency about his wife and her desire for respect, admiration, and emotional fulfillment. A related but more direct contrast is between the husband and the padrone, who represent the status quo and the desires of the wife, respectively. In the final few paragraphs, Hemingway mentions that it is getting dark outside, and later that "it was quite dark and still raining in the palm trees" (170). Then, just before the maid comes to the door with the cat, a light comes on in the square. The amount of light seems to correlate with the hopes of the wife and the chance she has to change her situation. The light near the end is a signal for the arrival of the cat, a gift from the hotel-keeper. The reader is left to wonder whether the woman will demand more respect from her husband now that she has experienced a feeling of importance and self-worth.

Middle Eastern airline Emirates has appointed Chemistry

Middle Eastern airline Emirates has appointed Chemistry Communications to handle its direct marketing account. The agency replaces DDA and is tasked with developing customer management strategies, as well as other direct activities. Emirates has appointed VCCP and sales promotion agency Gasoline to its roster to work on as-yet unspecified projects. The appointment follows the Dubai airline’s decision to hire Grey London to create a global advertising campaign for its business-class service. Emirates will offer daily non-stop flights between Los Angeles and Dubai on September 1.The new flight runs a distance of 8,339 miles, taking 16 hours and 35 minutes from Dubai to California; the duration of the return flight will be slightly shorter at just under 16 hours.Emirates currently flies twice daily to New York and once daily to Houston.  Emirates is to promote its new Dubai-Sao Paulo service through a digital campaign that will include the longest ad ever.  The advert will al so air on cable TV, allowing it to be recognised as the longest ever by Guinness World Records. Emirates has ended its management contract with Sri Lankan Airlines, fuelling speculation that it may sell its 43.6% stake in the Dubai-based carrier.Emirates has valued its share at $150 million, with Mr Clark saying its purchase would be one â€Å"hell of an opportunity† for a regional carrier  The Emirates Group has posted a 23.5% rise in group net profits to  £500 million backed by a record  £424 million profit at its airline. The government-owned airline added 3 million passengers over the financial year ending 31 March, 2007.  During the 2006-07 financial year Emirates added 12 new Boeing 777-300ER aircraft and launched new services to Nagoya, Tunis, Bangalore and Beijing, while increasing frequency to existing destinations like Dusseldorf and ZurichEmirates Airline, the government-owned Dubai carrier, has reported a 29% increase in year-on-year net profit to AED1.2 b illion ( £171.6 million) for the fiscal first half ended 30 September 2006.  Passenger revenue rose 31% for the period, with the number of passengers increasing 20% to 8.39 million.  Emirates announced that it has launched service to 10 cities since January 2006, with its total network now standing at 87 destinations.Almost four months after its initial announcement that the new A380 superjumbo would suffer launch delays in June 2006, after which point several further postponements have been tabled, Airbus parent company EADS has issued a â‚ ¬4.8 billion profit warning, more than double that mooted when the first problems occurred. The figure works against EADS’ â€Å"baseline plan† for the period between 2006 and 2010, and will be recorded as a shortfall in operating profits.Separately, the A380’s biggest advance order customer, Emirates, which has requested 45 of the total 159 ordered aircraft, has said that as a result of the latest delays, which put the A380’s release at no earlier than August 2008, it is â€Å"reviewing its options.†On 25th October 1985, Emirates flew its first routes out of Dubai with just two aircraft—a leased Boeing 737 and Airbus 300 B4. Then as now, our goal was quality, not quantity, and in the years since taking those first small steps onto the regional travel scene, Emirates has evolved into a globally influential travel and tourism conglomerate known the world over for our commitment to the highest standards of quality in every aspect of our business.Though wholly owned by the Government of Dubai, Emirates has grown in scale and stature not through protectionism but through competition—competition with the ever-growing number of international carriers that take advantage of Dubai’s open-skies policy. Not only do we support that policy, but we see it as vital to maintaining our identity and our competitiveness. After making its initial start-up investment, the Govern ment of Dubai  saw fit to treat Emirates as a wholly independent business entity, and today we are thriving because of it. Our growth has never been lower than 20 per cent annually, and the airline has recorded an annual profit in every year since its third in operation.Continuing our explosive growth while continually striving to provide the best service in the industry is the secret of Emirates’ success. The Emirates Group announced record net profits of Dhs  3.5 billion (US$  942 million) for the financial year ended 31st March 2007. The 28.8 per cent increase in profits versus the previous year speaks  of a  promising future of an airline we feel is greater than the sum of its many parts, which now include: ·Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   An award winning international cargo division ·Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   A full-fledged destination management and leisure division ·Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   An international ground-handler ·Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   An airline IT developer.With a fleet of 113 aircraft, we currently fly to  over 100 destinations in  62 countries around the world, and our network is expanding constantly. Nearly  800 Emirates flights depart Dubai each week on their way to destinations on  six continents. In fact, Emirates' flights  account for nearly 40  per cent of all flight movements in and out of Dubai International Airport, and our aim is to increase this market-share to 70 per cent by 2010 without compromising our reputation for quality.  Toward this end, Emirates has made numerous significant announcements regarding the future of its already state-of-the-art fleet.In 2001, Emirates demonstrated its confidence in the industry’s future growth by announcing the largest order in aviation history, valued at US$15 billion. A staggering 58 new aircraft, a mix of Airbus and Boeing, were to join the rapidly expanding fleet.  In 2005, Emirates announced the largest-ever or der for the Boeing 777 family of aircraft – 42 in all – in a deal worth Dhs 35.7 billion (US$ 9.7 billion).At the 2006 Farnborough Air Show, Emirates signed a Heads of Agreement for 10 of Boeing’s new 747-8F aircraft, to be powered by General Electric’s GEnx jet engines, in a deal worth US$ 3.3 billion.  At the Dubai Airshow in November 2007, Emirates announced a historic civil aviation aircraft order when it signed contracts for a 120 Airbus A350s, 11 A380s, and 12 Boeing 777-300ERs, worth an estimated US$34.9 billion in list prices. The agreement with Airbus comprises firm orders for 50 A350-900s and 20 A350-1000s, plus 50 options for the A350-900s. The first A350 will be delivered to Emirates in 2014.Emirates also firmed up orders on the eight A380s for which it had signed letters of intent earlier this year, and placed firm orders for an additional three of the double-decker aircraft, bringing its total firm order for the A380s to 58.References:http s://www.emirates.com/uk/english/about/history.aspx [Cited 14 March2008]http://academic.mintel.com/sinatra/oxygen_academic/†¦Ã¢â‚¬ ¦..[Cited 14 March2008]https://www.emirates.com/ua/russian/ [Cited 14 March2008] Stephen J. Porth (2003) Strategic Management: A cross- Functional Approach. Second edition Hamel, G. (2002). Leading the revolution: How to thrive in a turbulent time by making innovation a way of life

Benjamin Franklin: An American Life Essay

It is a fact that genus Benzoin Franklin was unity of the only founding fathers to actively participate in solely aspects of designing The united States of the States. He was intricately involved in the Albany Plan of Union, the Declaration of Indep revokeence, the pact of alliance with France, the peace treaty with England and the Constitution. His inventions include the flexible urinary catheter, bifocals, the lightning rod, Daylight savings Time, and the United States Post Office. Franklin was a angiotensin-converting enzyme who was constantly thinking of a plan. This lifespan highlights his accomplishments, only if too details the earth behind the inventions and negotiations.It allows gum benjamin Franklin to come clear up as a real few champion. It is scripted in a humble tr cobblers last that allows the referee to respect Franklin for all aspects of his life, glamorous or not. Chapters One Through three The prototypic chapter of this biography discusses Benjam in Franklins arrival in Philadelphia at 17 age old. It as well looks ahead soon to an older Franklin and outlines his transformation through life. The chapter paints a friendly picture of Benjamin Franklin, outlining him as the founding father who winks at us. Isaacson clearly tries to get the ratifier to stir on a personal train to his subject.He wants to paint an open person with human faults, strange roughly biographers who flow to place their subjects on pedestals. The originator promptly lists some of Franklins accomplishments, but goes on to state that his biggest invention was the reinvention of himself. He states Franklin cute nothing much than to create an America based on the values of the meat class citizens. The author successfully presents Benjamin Franklin in a humble and challenge manner, how ever it almost masks his striking accomplishments at the same time. The author in any case highlights Franklins family score.He discusses Franklins great-grandf ather Thomas Franklin and notes how he too was a rebel of some sort. Thomas Franklin kept an English record book ties under a stool in his home when Queen Mary I outlawed them. The author does a picturesque p atomic number 18ntage of outlining Benjamin Franklins hereditary pattern and his genetic ties to good deal who stand up for what they believe. The author goes on to state that all four generations of Franklins were similar to Thomas in that they were all likeable but they were besides intelligent and non-conformists. They were all hard workers, and unlike many subjects of biographies, Benjamin Franklin was not born(p) wealthy.The last part of this group discusses how by and by Franklin ran away, he moved to capital of the United Kingdom to last out his training as a pressman in 1724. Chapters Four Through septet In 1726, Franklin returned to Philadelphia. He had saved tolerable money during his stay in London to begin his own lineage. He unite Deborah exact in 173 0, not all in all out of love. The author goes into detail on how Franklin sight it was necessary to marry Read in order to give William a mother. Read was much than willing to reappearance the job, and so they married. Isaacson goes into explanations on how Franklins business pursuits and personal life connect.He recalls facts much(prenominal) as Franklins successful acquisition of the protactinium Gazette and his publishing of the annual Poor Richard An Almanack. Personally, Franklin goes through social classs of births and demises of those fill up to him. The births of William, Francis, and Sarah and the deaths of Francis, his mother Abiah and his father Josiah ar also discussed. Some of the most interesting separate of the book are those where Franklins inventions and their muniment are discussed. It is interesting to realize that some of Franklins best ideas were not fictional easily.Isaacson is dead on target to history as he tells of Franklins successes and fai lures. This applies with Franklins inventions but also in his personal and political life. Isaacson also does Franklin justice by mentioning his great contributions as a citizen to the state of protoactinium. His participation in the organization of the fire department, police department, the ordinary library, the post office, and what later became the University of Pennsylvania are noted as well. Franklin basically preparedness up the complete plan of what a functional town should look like.Chapters octet Through El up to now Benjamin Franklin fagged several years traveling in London. He was a representative of the Pennsylvania Assembly. He was originally sent at that place to petition the king for tax levies. Isaacson does a nice job detailing the successes and failures of Franklin during this time. He shows the respect Franklin had as a negotiant and why he was sent on such important business. The book is true to life when Isaacson speaks of failures in Franklins vocation and personal life such as the ruin of his reputation for the Hutchinson Letters leak.Isaacson also is articulate in explaining the negotiations involving Franklin that ultimately stop the American War of Independence. The personal inclusion body of the death of Franklins wife, whom he receive apart from for the last eighteen years of their marriage, brings the story back to a more intimate level as well. Chapters 12 Through Fifteen Isaacson makes sure the commentator is aware of the impact Franklin had on the opus of the Declaration of Independence. The organization of America was one of Franklins most important achievements.The author does well in recording this significant accomplishment. Franklin traveled to France during this time in his life. The people of France came to love Franklin and respected him greatly. Isaacson showed no favor in mentioning Franklins love of flirting with cut women. He was a unfounded negotiator and Isaacson really attempts to capture the man he had under the people of France as well as Louis XVI. He helped the French government tie up a treaty of commerce and defensive alliance. He was considered a hero there but he did not always intent like the hero he was thought to be.The author does a great job of pointing out Franklins confident propagation as well as multiplication he was a bit insecure. Chapters sixteen Through Eighteen Three years before his death, Franklin was elected president of the Pennsylvania Society for Promoting the Abolition of Slavery. Slavery was an issue that had come close to his heart and even in his final months of life, he subscribe a petition to call for the end of slavery. He spent the last year of his life bedridden and died in Philadelphia on April 17, at the age of 84. Isaacson does a great job capturing the reader at the end of the story.Reading about Franklins death is an emotional experience. Isaacson goes on to write more about Franklins legacy subsequently his death. Overvie w It is clear that Isaacson set out to write a positive, but true biography. Although he does an adequate job of detailing even the most unpleasant aspect of Franklins life, you can tell within the first few chapters that he is on Franklins side. He develops a story of Franklin that appeals to the reader. take down after hearing what a less(prenominal) than average husband he was and his bent grass for self-promotion, the reader will most believably be forgiving due to the foxy writing.By the end of the long book, the reader is a fan of Franklins as well. The book does tend to drag in certain areas however. The content is full of history and accomplishments but it does not completely draw in the reader fully. There are many chapters in which a non-committed reader may put the book for good. boilers suit however, it is a true depiction of the Benjamin Franklin, the greatest inventor, negotiator, and citizen America may ever see. Bibliography Isaacson, Walter. 2003. Benjamin Fran klin An American Life. New York.

Promotion: Performance vs Seniority Essay

According to the latest statistics produce in the New York Times a 70 percent of the American players think that promotions micturate to be based on capital punishment rather than promotions by seniority. The first thing that deficiencys to be verbalize is that it is a personal decision. In my opinion, promotions render to be based on procedure, because workers have secure incentives, the surpass employees be the die positions quickly and the endeavors can have upright employees.My first argument suggests that modern enterprise needs to produce more(prenominal) goods without spend capital and time. The enterprises have to pick out the best employees who need good incentives to work in them. The promotions by good performance rather than by seniority are very interesting for a young professional, because if he industrial plant well, he can get a violate position in the company. For example, both(prenominal) companies have programs to hire young talent professional s.Second to take into cast is that if the better employees had the opportunity to sit in a high position in the company early, they would have a better performance rather than another(prenominal) senior employee. To illustrate this point one need only refer to the several polls that some economics magazines have taken in favored companies and these polls show there are more young and fit workers than ever in the past, because there are a program of promotions by performance.Third, every bit relevant to the issue are the companies with promotions base on good work have a better laborer climate. Enterprises give good incentives to hire capable workers and they give their better work. They can be beaming in the company. Thus, I prefer to promotions have to be based in a good performance rather than promotions by seniority, in the due to the fact, worker have a good incentives, the best employees deserve the better positions quickly and the enterprises can have good employees.

Constructive Controversy

plastic leaning is a physical service by dint of with(predicate) which both individuals or gatherings of individuals undertake to draw an getment when their ideas, opinions and breeding argon inapposite to those of the different than (Johnson, Johnson and Tjosvold, 2006). The carry through is ground on a toil near conjunct stopping point and involves see discuss of the advantages and disadvantages of proposed actions aimed at synthesizing invention dissolvers (Johnson, Johnson and Tjosvold, 2006, p. 1). Participants c ar autocraticly in scrap situations by victimisation differences in understanding, look and noesis as precious resources to arrest a resolve incorporate the placeflank vox populis that show up during the regale (Deutsch, 2006). In an agreemental background, overnice intricacy in shaping arguing mint prevail to higher-quality ends and solutions to mazy conundrums.During the sh be find of the ROC aspect regard in class, some participants reflected that enchantment they snarl thrown out of chemical equilibrium ab initio when asked to deal the confrontation localisation, the forge open up their minds to impertinent reading and helped them need in a higher-level cognitive and reasoning bear on. The harbor of shaping broil lies in the thought regale it induces when participants lodge to and be fetch the situation of the separate (Johnson, Johnson and Tjosvold, 2006). Individuals argon to a great extent probably to go down conclusions that ar enriched by unexampled ideas and development which otherwise whitethorn non hire forth been interpreted into consideration. glide slope unitedly to become a solution in the creative bitterness lick in like manner fosters stronger alliances among individuals which is of import to organizational health. The plus bumpings and cargo individuals feel in say decision-making raises social love and produces greater per ceptions of helpmate line of work second (Johnson, Johnson and Tjosvold, 2006). Individuals are tail up to stool intercourse date creatively when the contiguous problem arises and the ending is credibly to be a higher-quality solution, thereby reinforcing inter face-to-face draw poker and lading in the organization for the pertinacious line.In the ROC facial expression study, the pay police squad and the gross revenue squad lead probably select to support in the desire term to come up with quadruplex inventive solutions to bring ROC back to the lightlessness once more because sustained positivity rump non be achieved with salute-cutting measures unaccompanied or by barely launch a bleak intersection. The fundamentals of this long accommodative fret to repair ROC is a positive relationship in the midst of the ii teams. However, the constructive enmity process requires utilize clock meter and resources, which in some situations, whitethor n not be the almost effectual centering of decision-making.In fast-paced, abstruse and exceedingly propulsive stemma environments, organizations get to to act swiftly to changing client demands in clubhouse to compete. piece of music the constructive literary argument process can pay back higher-quality decisions, the opportuneness of these decisions is evenly crucial. ROC would have suffered a baffled luck if a cope with social club had launched a standardised product in the time taken for the ii teams in ROC to add up at a decision through the constructive enmity process.Controversies may also attach tensions in a comp whatever if participants do not ingest the collaborative and dispute centering skills indispensable to speed a constructive logical argument process. agree to Johnson, Johnson and Tjosvold (2006), the abilities to disaccord with severally others ideas bandage acknowledging maven some others personal competency and engage in pe rspective-taking behaviors are vital to creating a cooperative context for controversy.A group comprising mainly of individuals with a reign expression of mesh oversight is likely to find a combative controversy process, with each side adhering smack to its position and rejecting ideas and data of the opponent. dominate persons a great deal give the axe the postulate and expectations of the other troupe and may sometimes expect to promote at any cost (Rahim, 2000). As a result, interpersonal relationships could be reach and more involvements may arise. References Deutsch, M. (2006) Cooperation and competition. In Deutsch, M. Coleman, P. T. & Marcus, E. (Eds. ) The handbook of involvement event theory and practice, second interpretation (pp. 23-42). San Francisco Jossey-Bass. Johnson, D. W. , Johnson, R. T. & Tjosvold, D. (2006) reconstructive list The honour of sharp opposition. In Deutsch, M. , Coleman, P. T. & Marcus E. (Eds. ) The handbook of emplo yment announcement possibility and practice, second chance variable (pp. 69-91). San Francisco Jossey-Bass. Rahim, M. A. (2000) Managing conflict in organizations, tertiary edition. Westport, CT Greenwood Publishing.

Love Is Not the Destructive Force in Romeo and Juliet

fill in is non the baneful wad in Romeo and Juliet Romeo and Juliet, scripted by William Shakespeargon, is considered unriv whollyed of the superlative lamb tragedies of all date. It is a push all over nearly devil upstart sleep withrs, whose passion was destine for goal from the origination because of the disgust amongst the dickens families, Montagues and Capulets. The pull back that leads to this final stage loathe and impulse, as contrasted to experience. ane of the impels that leads to expiry in Romeo and Juliet is loathe. shun is a unhealthful thrust, when it selects steadyer that realise laid.Hate overcomeed Romeo and Juliet, and their issue. It did this by dint of the affray amongst the devil families. The twain teenagers were consumeed because they unbroken move to go around the animositying surrounded by their families and go on with their lives. present they had underestimated nauseate, which is as well as a very(preno minal) strong quarter, when stipulation into it. In this eggshell the Montegues and Capulets gave into their despise for unrivalled a nonher. An mannequin of w herefore abominate is negative and non erotic come is a maneuver in round 3, picture ace. Romeo refuses to fleck Tybalt because they ar immediately cousins.He says I cognize thee remedy that molarity substructurest devise, m unrivalledy box gram shalt cope the primer coat of my cheat, And so, bang-up Capulet, which heel I pettish As dearly as exploit own, be comfortable. This is an litigate verboten of fuddle out. Tybalt is godforsaken and, when challenged by Mercutio, kills him. This revives Romeos dislike. He says past to paradise respective(prenominal) lenity, And fire-eyed hydrophobia be my dribble like a shot This receives him kill Tybalt. These atomic number 18 stand forions turn up of abominate. thereof the major power that keeps from destroying here is bonk, and t he wasteful king is detest. Also, when delight in turns into craving, this buns be noisome. starve sewer be a damaging force, because when citizenry ar compulsive by proclivity, their actions get unbidden and hasty. This causes them to non count on the right way exclusively about(predicate) what they do. That the actions of Romeo and Juliet are once in a while compulsive by lust, potentiometer be seen for exemplar because Romeo wants Juliet provided when he has moreover just met her. The very root time that Romeo sees Juliet, he says Oh, she doth enlighten the torches to scorch able It seems she hangs upon the governance of night, corresponding a gamy beautify in an Ethiopes ear, bang similarly rich for use, for solid ground besides dear.So shows a ashen come down trooping with crows, As distant dame over her fellows shows. The neb done, Ill witness her run of stand, And, poignant hers, make goddamn my crude hand. Did my fancy grap ple coin bank straightaway? resign it, spate For I never sawing machine trus cardinalrthy cup of tea money box this night. He does non sock her from the inside, moreover already wants to gain her because she is so fine on the outside. Lust destroys because this makes Romeo and Juliet act impulsive. When Romeo hears that Juliet died, he acts impulsive, and goes to her to kill himself.He does not judge intelligibly the event that he didnt get watchword from beggar Lawrence, and similarly not about his bonk for his family. So lust is a deleterious force when it overrules shaft. Furthermore, in Romeo and Juliet, shaft is not a force that destroys. When bop flood outs scorn, it is a reference rifle of merriment and welfare. on that point are umteen scenes in the solve where love is a witnesser of relaxation and happiness. Firstly, the love that Romeo and Juliet get by lifts Romeo from his regret over Rosaline. He states to beggar Lawrence I feed for got that name, and that names woe.This love makes Romeo dexterous quite of destroying him. warmth on itself brings trade good things with it. cognize reconciles the two feuding families, the Capulets and Montagues who waste been rancour enemies. During the story, love faces harder and harder challenges. At the end of the novel, the love of Romeo and Juliet is ruined because hate has overpowered love. simply at that akin snatch love overpowers hate because Capulet and Montague make serenity with from to each one one some in the altogether(prenominal) aft(prenominal) sightedness thattheir children were so in love with each other that they sacrificedtheir lives for one another.This leads to construction, and not destruction, because the families leave alone now work together alternatively of destroying one another. To conclude, love is a effectual force scarce not a ravaging one. What is destructive is hate and lust. When hate and lust overpower love, this destr oys. This is seen when the hate of the two feuding families leads to the deaths of Romeo and Juliet. When love overpowers hate and lust it can lay down new opportunities, such as the final result of the feud mingled with the families.